Electric basket, such as fault cannot be ruled out, still should cut off the power switch, using the method of manual glide down the suspension platform for maintenance. Electric safety lock open, when the job is, should be in a state of work automatically, without manual operation. It as ascension is the function of system failure and led to the decrease of the Suspended Platform speeding, can automatically lock on the safety rope, Suspended Platform had stopped falling ensure human safety. When troubleshooting, need to reopen the safety lock, should first point Suspended Platform to rise, make the safety lock is a bit loose, can throw open the handle and open the safety lock. Is strictly forbidden in the security rope tight case, hard pull (open handle, so as not to damage the safety lock. Don't start the machine after the safety lock locking down such easy to cause severe damage to hoist. Work because of the loose strands wire rope, kink or hoist don't damage the card plug inside the elevator work when the card plug inside the elevator wire rope, should immediately stop.
Suspended Platform it mainly USES the domestic and foreign advanced technology, reasonable structure, compared with other structure of the Suspended Platform has higher convenient, simple operation, safe and reliable, the various specifications, saving investment, high efficiency, etc. Suspension platform in the process of the rise and fall as still can't stop after release, should immediately press the electric tight stop switch on the door is red, the suspension platform emergency stop. And then cut off the electric power switch, check the contactor contact, contact surface adhesion oil impurities, hand press contactor can resume normal after action, close the power switch, twisted tight stop switch to restore its in situ after back to work.