1, the operator must be in good health, and pass by. The professional training in the operation certificate issued by the relevant departments of the rear can independent operation. Students should be performed under the guidance of teacher.
2, the following check experiment was carried out after installation, after the normal before delivery.
1) check the roof installation, should cooperate well, anchor and reliable; The cantilever length and connection are correct;
2) no kink, crowded injury, wire rope loose; Wear, broken wires are not overrun, suspension, rope way and weigh all right;
3) and falling, and outside the rotating mechanism of complete and reliable safety protection devices;
4) motor is ringing, overheating, start the normal, reliable braking;
5) Suspended Platform should be rated lifting weight 125% 125% of the static overload test and dynamic overload test, required lift, normal spacing device is sensitive and reliable.
3, should be done before operation the following check:
1) roof institution, weigh and wire rope meets the requirements;
2) the power supply voltage should be normal, good grounding (zero);
3) mechanical equipment is normal, complete and reliable safety protection devices;
4) in the basket without sundry, overload is strictly prohibited.
4, after start-up, carries on the elevator basket of running test, after the normal before operation.
5, job, found is abnormal, should immediately stop, and take safety protection measures. Without professional inspection before repair may not continue to use.
6, the use of Suspended Platform for welding work, must carry on the comprehensive protection of Suspended Platform, wire rope, it shall not be used as wiring circuits.
7, homework, Suspended Platform should be clean, hanging from the ground at 3 m, cut off the power, from the ladder.